Bulk Handling Liners

 

GRAIN PROCESSING

Improve the quality of your grain product and increase production by eliminating arching, ratholing and grain segregation with a pipe, spout or chute lining solution designed by Redco™ Lining Systems.

Redco™ TIVAR® 88* LINERS are ultra slick and abrasion resistant. They also improve material flow and eliminate production hold-up because of material building up in places within your production process. For more demanding lining applications with severe sliding and high load applications Redco™ TIVAR®* CERAM P®* will reduce wear and prolong equipment life.

Large or small, the Redco™ Lining Systems team can design the most optimal liner for your

application, requiring little or no maintenance, with easy installation.

 

MINERAL & METAL  PROCESSING

Solve your bulk material arching, bridging, segregation or flooding problems with a lining solution designed by Redco™ Lining Systems. Whether the bulk materials you handle are fine and dusty, caking, cohesive or abrasive, the Redco™ Lining Systems Team will analyze and design a lining solution for your chutes, storage silos, transition hoppers, etc.

Redco™ TIVAR® 88* LINERS are ultra slick and abrasion resistant; improving the flow of your material.

Redco™ TIVAR®* CERAM P®* will reduce wear and prolong equipment life in demanding applications with

severe sliding and high load applications.

 

RAILCARS

Eliminate sticking and material hang-up problems to speed up turnaround times and increase efficiency hauling capacity.

The Redco™ Lining Systems Team designs solutions for bottom dump and rotary railcars as well as wall liners to protect cars from structural damage.

By utilizing Redco™ TIVAR® 88* liners in the bottom of dump railcars or rotary dump railcars, turnaround times can be reduced by as much as 50% and carry-back can be virtually eliminated.

 

POWER & COAL PLANTS

Increase process efficiencies and reduce operating costs with a lining solution designed by Redco™ Lining Systems. Utilizing Redco™ TIVAR® 88* &/or Redco™TIVAR®* CERAM P®* keeps bulk materials moving by eliminating arching and ratholing. Redco™ TIVAR® 88* with BURNGUARD™* has flame retardant properties; self extinguishing when the source of combustion is removed. Redco™ TIVAR® 88* with BURNGUARD*™ meets MSHA 1C-112/1 for underground mining and has a UL94 V-0 flammability rating.

Redco™ TIVAR® 88* liners are ideal for bins, bunkers, hoppers, chutes, silos, discharge feeders, etc., helping you achieve mass flow, increase output capacity and eliminate coal stagnation.

Stagnant coal problems increase your risk of spontaneous combustion, Redco™ TIVAR® 88* liners eliminates congestion, so your product flows smoothly and consistently, helping the plant maximize electrical output and reduce safety and maintenance issues.

 

STEEL MILLS

Eliminate mass flow problems in discharge hoppers that fill ore cars and hoppers with coal into ovens with

lining solutions designed by Redco™ Lining Systems. Redco™ TIVAR® 88* &/or Redco™ TIVAR®* CERAM P®* liners are

available for bins, bunkers, chutes, discharge hoppers, etc., that promote consistent, reliable flow, reducing or

eliminating variations in final product quality.

 

CEMENT PLANTS

Redco™ TIVAR® 88* &/or Redco™ TIVAR®* CERAM P®* liners eliminate arching and ratholing during cement processing.

With its low coefficient of friction, Redco™ Lining Systems promote consistent flow; resulting in consistent cement quality. The Redco™ Lining Systems Team designs unique application specific lining solutions for chutes, hoppers,

pan feeders, etc., that promote mass flow.

 

CHEMICAL PLANTS

Limited funnel flow, material build-up, segregation and fine particle abrasion/corrosion slows production. The Redco™

Lining Systems team has a lining solution to eliminate these problems and achieve mass flow. Redco™ TIVAR®* 88, Redco™ UHMW & Redco™ TIVAR®* CERAM P®* liners can be installed into units; including bins, silos, tanks, as well as, feeders and piping for liquids, powders and solids.

 

PACKAGE HANDLING PLANTS

Hang ups are hold ups that cause frustrations and stop production. Worn paint and gummed up rollers slow down packages and cause congestion. Paint on liners wear out quickly and cause damage to rollers and packaging and require continual cleaning and dusting, increasing maintenance costs.

PRISMA TIVAR®* DRYSLIDE keeps packages moving; even on humid days, and has been proven to save weeks of downtime per year in replacement and maintenance costs. PRISMA TIVAR®* DRYSLIDE is long wearing with an ultra

slick surface and antistatic properties.

• Under belt wear strips

• Diverter bars

• Transfer plates

• Dead plates

• Belt skirting

(video courtesy of Quadrant EPP)